Chamberlain CHU62W Remote

Your Chamberlain CHU62W at a glance

Two buttons can be paired separately.

CHU62W battery & holder

CR2032, 3 V.

Programming your CHU62W

Setup depends on the exact receiver and hardware revision. These model notes do not establish a complete pairing sequence for your equipment.

Match both the remote and opener or external receiver. Keep the door or gate in sight and clear of people. Do not hold a LEARN button or erase memory unless the instructions for that exact equipment require it.

Compatibility & exclusions

Multi-brand support is limited to listed equipment; residential openers need photoelectric sensors and must be supported post-1993 models.

Exact brand and model are needed to choose the pairing procedure.

If your CHU62W is not working

General troubleshooting checks.

• No response: check the marked battery type and polarity; note whether another authorized control works.
• Short range: note when the problem began and whether it changes by location. Do not alter receiver wiring.
• Damaged case or buttons: keep the model label; stop using exposed, wet or damaged electronics.

CHU62W repair, parts & replacement

No exact replacement or part mapping has been confirmed for this page. A similar-looking remote, matching frequency or familiar model family is not sufficient evidence of interchangeability.

Model guides

Use the model-specific notes on this page with the instructions for your opener or receiver. A documented receiver match does not establish compatibility with every opener.