Chamberlain CH382 Remote

Your Chamberlain CH382 at a glance

Confirm the brand and the complete CH382 label, including any additional suffix or hardware revision. A similar case or shared model number does not establish an interchangeable remote.

CH382 battery & holder

One 3 V CR2032, positive side up.

Programming your CH382

Setup depends on the exact receiver and hardware revision. These model notes do not establish a complete pairing sequence for your equipment.

Match both the remote and opener or external receiver. Keep the door or gate in sight and clear of people. Do not hold a LEARN button or erase memory unless the instructions for that exact equipment require it.

Compatibility & exclusions

Chamberlain/LiftMaster/Craftsman openers after 1997, excluding Craftsman Series 100. Gate/commercial/external receivers require separate instructions.

Receiver-specific enrollment and replacement equivalence remain unverified.

If your CH382 is not working

Checks for CH382

• White Learn after prior use on another generation: use the other-color sequence, but expect a flash/one click, not door movement.
• Failed test: wait for Learn LED to extinguish before retry; yellow/white may take three minutes.
• LED stops flashing: battery may be low.

General troubleshooting checks.

• No response: check the marked battery type and polarity; note whether another authorized control works.
• Short range: note when the problem began and whether it changes by location. Do not alter receiver wiring.
• Damaged case or buttons: keep the model label; stop using exposed, wet or damaged electronics.

CH382 repair, parts & replacement

No exact replacement or part mapping has been confirmed for this page. A similar-looking remote, matching frequency or familiar model family is not sufficient evidence of interchangeability.

Model guides

Use the model-specific notes on this page with the instructions for your opener or receiver. A documented receiver match does not establish compatibility with every opener.